iFlight CineBee 75HD 2-3S Whoop RC FPV Racing Drone W/ SucceX mirco F4 12A 200mW Turtle V2 HD PNP BNF

iFlight CineBee 75HD 2-3S Whoop RC FPV Racing Drone W/ SucceX mirco F4 12A 200mW Turtle V2 HD PNP BNF Notes: this RC drone comes with 2-3S, but if you want to use 4S, you have to change the compatible motor. Description: iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-4S. Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello. Specification: Item name: iFlight CineBee 75HD 2S whoop Total Dimensions: 110x93x30mm Frame Wheelbase: 75mm Bottom & Top Plate Thickness: 1mm Standoff height: 22mm Build Weight: 64.4g (without battery, receiver) Connector: XT30 Support Battery: 2S Flying Time: over 3mins (battery recommend: 2S 420 mAh) SucceX Micro 16x16 F4 2-4S Flight Control SucceX Micro 12A 4in1 2-4S BlheliS ESC SucceX Micro 200mW switchable VTX iFlight XING NANO X1103 2-3S motors (1.5mm shaft) Caddx.us Turtle v2 HD FPV Cam Receiver: Without Receiver/ FS-A8S V2/ Frsky XM+/ Frsky R-XSR/ DSM2 DSMX Receiver (option) Gemfan 1635 40mm 3-blade 1.5mm props iFlight Prop Guards 40mm Click For English Manual. SucceX Mirco F4 Flight Tower System 16x16mm SucceX F4 Flight Controller -STM32F411 -Input voltage 2-4S LIPO -Gyro: MPU6000 -2x UART ports -4x motor outputs -OSD inbuilt -No Blackbox FLASH -BEC 5V 2A cont. -Size: 21mm*21mm -Mounting holes: 16*16 -Weight: 2.5g -BF target : MATEKF411 SucceX Mirco 12A Brushless ESC -Firmware: BlheliS -Input voltage : 2-4S LIPO -Continuous current: 12A -MCU: BB21F16G -BEC : None -ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc. -Size: 23mm*21mm -Mounting hole 16*16mm -Weight: 2.7g SucceX Mirco VTX -Power : PIT/25/100/200mW -Antenna interface : IPEX (UFL) -Telemetry: IRC Tramp -Size: 17mm*27mm -Mounting holes: 16*16mm -Weight: 1.6g Features: - ultra-light but high performance - JELLOFREE durable carbon/plastic construction - no props or prop guards in view - upgradeable, versatile, futureproof SD card insert and ejection: -The HD cam PCB is conveniently placed under the frame, protected by a cover. -To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard. Cam- and VTX control implementation: -Both Cam and VTX can be conveniently setup on your radio and in your OSD. Package included: 1x iFlight CineBee 75HD Frame Kit 1x SucceX Micro 16x16 F4 Flight Control 1x SucceX Micro 12A 4in1 BlheliS ESC 1x SucceX Micro 200mW switchable VTX 4x iFlight 1103 2-3S motors 1x Caddx.us Turtle v2 HD FPV Cam 1x Without Receiver/ FS-A8S V2/ Frsky XM+/ Frsky R-XSR/ DSM2 DSMX Receiver (option) 4x Gemfan 1635 40mm 3-blade 1.5mm Props 4x iFlight Prop Guards 40mm white 2x iFlight 10*100mm magic battery straps black 1x set of accessories