XY-BLDC Three-phase Brushless DC with Hall Motor Controller Module Brushless Motor Drive Board

Feature Product name 200W brushless DC motor driver with Hall effectModel XY BLDCWorking voltage 12 30VMaximum current rated 7A peak value 10AMaximum power 200WOvercurrent protection YesPositive and negative YesBrake YesSpeed control PWM YesSpeed control analog quantity YesProduct size 80x30x10mmExternal signal input description 1 When an external PWM signal is input the amplitude is 5V and the recommended PWM frequency is 1K 10KHz 2 For analog input you can use the on board 5V GND external potentiometer resistance 10K 100KΩ to adjust the speed or external input 0 5V analog but it needs to be connected to the GND on the board 3 For forward and reverse rotation control the motor needs to stop rotating and then perform forward and reverse operation It is strictly forbidden to change direction during the rotation of the motor which will cause damage to the circuit board In addition after removing the short circuit cap the steering switch can be connected externally for operation 4 5V GND The motherboard comes with a 5V power supply external power supply can be provided the current does not exceed 10mA 5 Speed pulse signal output the amplitude is 5V each pulse represents one revolution of the motor Precautions 1 There is no fuse in the power supply circuit on the motherboard It is recommended to add it yourself Reverse connection of the positive and negative poles of the power supply will cause permanent damage to some chips on the board 2