MC001 DC 3.7-6V 30KV High Voltage Pulse Generator High Voltage Igniter Module Arc Lighter

Description Product Name high voltage generatorModel MC 001Volume length 40mm diameter 21mmVoltage input DC 3 7 6V output DC 30KVCurrent input 4A output 0 5ACable length the input is about 10cm and the output is about 10cmStructure small volume oneBipolar discharge distance about 1 5cm if exceed easy to damage Use often used in high voltage production electronic DIY product development high voltage electronic burglar proof etc Method of use high output monochrome thick wire poles fixed on the discharge within the prescribed distance low input dichroic thin wire red green connected with the battery can produce high voltage arc work Input requirements This product does not need auxiliary circuit and can be directly used for battery Input terminal is connected to single 3 7V lithium battery such as 18650 battery or Ni Cd Ni MH battery pack 4V or 6V lead acid battery and so on 6V battery can achieve the best effect Modules used for attention 1 The high voltage module should avoid the use of electricity when no load is high Before switching on the proper distance of the high voltage wire must be adjusted The distance between the high voltage wire and the battery is directly proportional to the battery voltage and capacity 2 When measuring the distance of the arc it is necessary to test the distance from short to long and it is forbidden to exceed the longest arc distance Because the high pressure energy can not be released it is very