Eachine ET5 Pro Mini Gasoline Engine Model Stirling With Pump Water-cooled Cooling Structure

Specification Brand EachineItem Name Eachine ET5 ProSize 170 94 85MMDisplacement 1 6CCCylinder diameter 13MMItinerary 12MMWeight 1700GThis is a mini engine It is made of brass and stainless steel Water cooled cooling structure The bore is 13MM The stroke is 12MM The carburetor with adjustable speed is used The ignition is powered by 1 5V power supply This is a mini impeller pump which is made of brass which better restores the actual details The size of the connection nozzle is 10 6MM The length is 70MM the width is 42MM and the height is 76MM The weight is 143G Its starting can be divided into two ways external force electric drill and manual startingFeaqtures Engine startup steps 1 Check the wiring of the engine from the board connect the fuel tank pipeline and install a No 5battery 1 5v 2 Use gasoline 95 to fill the fuel tank After the filling is completed turn the flywheel clockwise onthe right side of the engine power switch surface for many turns No air can be generated3 Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine power switch surface to start the enginePrecautions 1 If the ignition device is normal and the cylinder compression is normal if the machine cannot startnormally it is very likely that the carburetor oil needle needs to be adjusted2 After tightening the main oil needle on the carburetor loosen 1 4 turn and start the flywheel so thatthe mixing ratio of gasoline and air can