M20 Single Cylinder Gasoline Engine Stirling Engine Model Power Generator Educational Steam Engine Toy Science Experimen

Description This is a micro engine It is made of brass and stainless steel It has a limited speed structure The ignition device is powered by a 4 5V power supply Its starting can be divided into two ways external force electric drill and manual starting Specification Item Name Engine Stirling Engine ModelSize 120 80 75mmDisplacement 1 6CCCylinder diameter 13mmltinerary 12mmWeight 900gEngine startup steps 1 Open the bottom plate to check the wiring of the engine connect the fuel tank pipeline and install three No 5 batteries 2 Use gasoline 95 to fill the fuel tank when the flling is completed screw the fuel tank cap 3 Block the carburetor port with your hand and slowly turn the wheel counterclockwise on the right side of the engine in the direction of theflywheel to buy the wheel for multiple laps its role can make the mixed gasoline fully enter the cylinder Ensure that there is no air in the oil pipe produce 4 Turn on the power switch and quickly rotate the flywheel counterclockwise to start the engine on the right side of the engine flywheel position Precautions 1 When the ignition device is normal and the cylinder compression is normal if the machine cannot start normally it is very likely that thecarburetor oil needle needs to be adjusted 2 Unscrew the screw on the top of the carburetor from the bottom then loosen 1 4 turn start theflywheel so that the mixing ratio of gasoline and air can reach the normal working mixing ratio after several