12V 800M AKS Handhold Antenna Metal Detector Locator Scanner Gold Mineral Detecting

Specification Maximum Detection Depth 14 MetersSearch Range 800 MetersEnergy 12V 1600mAhTransmission Frequency 5 6 6KHzSignal Frequency 360 440HzDetection Type Gold Silver Copper DiamWeight 3 2KGUse of the Transmitter 1 Power Switch This is the power switch button When the instrument is not used the switch should not be turned on 2 Select the metal you want to probe according to the metal you want to probe Gold Silver Copper Diam Note It can not select two metals at the same time Otherwise it will damage the instrument Use of the Host Just turn on the power switch It can be detected based on the original selected metal species above the emitter Operation Method Because the instruments handle is free to rotate wind can interfere with the metal detector Therefore the use of this instrument in the presence of wind will be subject to certain interference The use of this instrument is very much related to the operators control of the scan Choose a comfortable posture to stand on the ground hold the instrument with your hand and keep your elbows close to the sides of your body Note You must have this instrument in front of your body so that the receiving antenna has enough space to deploy and tilt the antenna slightly downwards from the horizontal line This angle is between 7 degrees and 10 degrees 1 Hold the instrument as above scan very slowly in an arc while turning yourself At this time the probers elbow should always be tightly pressed again