ZFX-W1602 Adjustable Thermostat Switch with Digital Display Intelligent Temperature Controller High-Precision Incubator

Specifications Product model ZFX W1602Power supply voltage 12V DC 24 60V DC 220V ACTemperature measurement range 50 ℃ 110 ℃Temperature measurement accuracy 0 3Resolution 0 1Temperature control accuracy 1 ℃Sensing line NTC 10K 3435 L 1mOutput type direct outputDiameter 86mmParameter Settings 1 In the setting mode long press the SET button for 5 seconds P0 will be displayed and short press the SET button to switch the H C H is heating C is cooling 2 Set the stop temperature press the SET button once the screen flashes and press the up and down keys to directly set the desired temperature 3 Press and hold the SET button for 5 seconds to display P0 Press the up and down buttons to switch to P1 and then press the SET button once again to set the return difference press the up and down buttons to adjust If the heating mode wants to be set to 35 ℃ 37 ℃ Time the stop temperature is set to 37 and the return difference is set to 2 4 Indicator light SET light is on indicating that the parameter is being set OUT indicator flashes to indicate the start delay and constant light indicates the output5 Nixie tube display LLL as sensor abnormality display HHH as sensor causing short circuit or exceeding the measurement range when the temperature is flashing it is in the setting or alarm state ParameterFeaturesRangeDefaultsPOOperating modeHeating cooling H CHP1Backlash setting0 1 302P2Set an upper limit 5 110℃110℃P3Set lower limit 50