ZENCHANSI PAL Camera + VTX AIO 5.8Ghz 40CH 25mW/200mW/400mW Power Adjustable VTX +700TVL FPV Transmitter Camera 16mm*16m

Features Adjustable 4 modes 25mW 200mW 400mW OFF Betaflight Cleanflight OSD configuring parameterClean powerup and channel switching without interference to othersUser Guide1 LED indicationThe red LED indicates the state of working mode or the item when setting the VTX flashing 1 time means selecting the channels flashing 2 times means selecting the bands flashing 3 times means selecting the power levels The blue LED indicates the state of Pitmode or the value of item when setting the VTX e g when selecting the channels 3 times of flashing means channel 3 When selecting the bands 3 times of flashing means band C As for the item of power levels 3 times of flashing means at thepower level of 400mW 2 Working mode indicationAfter powering up the redblue LEDs will signal the following three items of VTX in turn channel band and power level the flashing times of the red and blue LEDs indicate the item and the value respectively After that the LEDs indicate the working modes Normal The redblue LED are on Pitmode The red LED is on and blue LED is off 3 SettingPress and hold the button until the red LED flash 1 time which means the item of channel selecting then press the button can select the channels blue LED flashing times corresponds to the channel 1 8 Press and hold the button again the red LED will flash 2 times which means the item of band selecting then press the button can select the band blue LED flashing times corresponds to the band A E Press a