XKC-C350-3P 3M Non-contact Liquid Level Water Level Controller Alarm Intelligent Anti-dry burning/Anti-overflow

Manual Click here to openDescription XKC C350 3P high and low level controller and XKC Y25 V three liquid level detection heads realize liquid level high and low control and motor idling protection function when the container liquid level is too low it will trigger the low liquid level alarm signal sent by the low liquid level sensor Trigger the C350 controller to close the relay to start the water pump to add liquid level When the liquid level reaches a certain height the high liquid level sensor sends a signal to trigger the C350 controller to open the relay and automatically stop the water pump Thereby the function of automatic control of the container liquid level is realized and the container liquid level is kept stable The idling protection function of the water pump is also added When there is no water at the water inlet the water pump will be automatically disconnected for 3 5 minutes to protect the water pump Function introduction 1 Automatic water level control when the water level is lower than the sensing probe the water pump will be started automatically when the water level rises high the water pump will be shut down automatically2 Pumping overtime protection when the continuous automatic pumping exceeds 5 hours the pump will stop automatically The working indicator light flashes quickly and it can be stopped by pressing the K2 key or it can automatically delay to resume standby 3 Manual and automatic switching the controller will enter t