XH-W1319 Incubation Thermostat Digital Temperature Controller Hatching Mute Heating Temperature Control Module

Specification Product Name Incubator dedicated thermostatProduct model XH W1319Temperature range 0 110°CTemperature control range 20 39 5°C the range can be increased Temperature control accuracy ±0 1 °CTemperature probe NTC10K comes standard with 1 meter waterproof probeSupply voltage DC12 24VApplicable environment 15 55°C no frostOutput type MOS tube direct outputOutput power up to 10AProduct size 100 48 28mmEmbedded hole 71 41mmWire length 25cmProduct weight 45gPackage included 1 x Incubator dedicated thermostatInstructions 1 How to set the stop heating temperature Connect the power supply and the heating pad correctly according to the wiring diagram connect the red and black to the power supply and the yellow and black to the heating pad After the connection is connected power on and display the real time temperature press the set button once and when the screen starts to flash press the up and down buttons to set the stop temperature you want After setting wait 5 seconds or directly press the OK button to save the data 2 How to set the restart temperature After stopping at the set stop value the restart temperature is the stop set by youFor example if you set the stop at 38°C with a difference of 0 1°C then it will be heated again after it stops at 38°C and drops to 37 9 3 How to expand the setting range The factory default setting range is 20 39 5°C If you first set 20 45°C set P1 to 45°C If you want 24°C for the lowest temperature se