X860 M.2 NGFF 2280/2260/2242/2230 SATA SSD NAS Storage Expansion Board with USB 3.0 Jumper for Raspberry Pi

Overview: The new member of the Raspberry Pi storage expansion board family - X860 (M.2 NGFF SATA 2280/2260/2242/2230 ) is coming. 2280/2260/2242/2230 Features: - Ideal storage solution for Raspberry Pi - M.2 NGFF SATA SSD Shield - Supports up to 2TB m.2 NGFF SSD solid-state drive - Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230 - Supports operating system installation and booting from your SSD - Supports faster OS image writing (>300Mb/S*) from a PC or a Mac - Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller - USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi - Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac - USB bus-powered - LED blue indicator indicates drive status - Specially-made USB3.0 connector to connect with Raspberry Pi - no additional cables needed - On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts) - Fully compatible with X720, X730 and X735 for intelligent and safe power management - PCB Size: 87mm x 56mm Note: - *The Raspberry Pi main board is not included. - USB3.1 Gen 1 port, SSD sequential write speed >300MB/s - NGFF SATA SSD is not included - Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs - As with all SSDs, new media must be formatted before use - Performance depends on host system, workload, and SSD media used - SSDs use exceptionally high performance storage media that will run hot when under load - Older SSD drives with less efficient flash media may not perform as well as newer drives - We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0; Power supply request: 5Vdc +/-5% Powered by Raspberry Pi Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient) 5Vdc via on-board micro-USB or XH2.5 2Pin connector Ports & Connectors: - USB socket - USB 3.0 type A x 1 - Micro-USB SSD power socket x 1 - XH2.54 SSD power input port x 1 - 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1 Click for more info Package included: 1 x X860 Board 1 x USB3.0 Connector 1 x USB 3.0 A-Male to A-Male Data cable(about 60cm) 1 x Screws Pack