Wooden Camera Sony FX9 Unified Base Accessory Kit

The Sony FX9 Unified Accessory Kit (Base) is a professional camera support package designed for the Sony FX9 camera and utilizes our Unified Baseplate System. The FX9 accessory package includes: Top Plate (Sony FX9), a top mounting camera cheeseplate for accessory attachment, Unified Baseplate (Sony FX9), a quick release, camera baseplate for holding the two 15mm Rod (12") at the correct lens height, and Top Handle V2, a bolt on top handle that attaches to the top plate and has multiple mounting points for accessories.- Top Handle V2 (2" Slotted Screw Channel) -Top Handle V2 (2" Slotted Screw Channel) is a new top handle designed to screw directly onto the top of a camera or to a top cheeseplate. The Top Handle V2 has a side to side screw channel that can fit two 1/4-20 screws up to 50mm apart center to center (2 inches) and a center screw channel up to 27mm apart (1.06 inches). The handle features an ergonomic metal grip, a 15mm tube clamp for attachment of our UVF Mounts, two integrated shoe mounts, 1/4-20 and 3/8-16 mounting holes, and ARRI accessories mounts (3/8-16 threaded hole with locating pins adjacent).- Top Plate (Sony FX9) -Top Plate (Sony FX9) is temporarily backordered but should be available soon. When TEMPORARILY BACKORDERED items are added to cart, package will ship when all items are available. Please check out for regular items separately if immediate shipping is desired.Top Plate (Sony FX9) is a top cheeseplate for the Sony FX9 that contours to the shape of the camera body. Arrays of 1/4-20 holes in standard spacing and multiple 3/8-16 holes with ARRI accessory mounts are also available in several places. Original Sony handle can be reinstalled by removing the center section of the top plate. Communication between the handle and the Sony body is possible by using just the U shaped portion of the top plate. The Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.- Unified Baseplate (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500) -Unified Baseplate (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind.To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. An example of this would be the Sony FS7 using a Metabones Canon EF adapter. The upper dovetail would be positioned with the vertical 15mm rod opening to the front and the Unified Lens Adapter Support Kit would be installed and threaded into the Metabones support foot.The bottom of the baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio). To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails, Safety Dovetails, or Shoulder Rigs.For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate, providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head.Note: The Unified Baseplate is backwards compatible with our original Quick Dovetail (Standard) and Quick Dovetail (DSLR, Large)- 15mm Rod (3"-24") -15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.