WR06 2.4G 300Mbps External Dual Antenna Repeater Wireless Router Signal Amplifier(US Plug)

1. Extend your existing WiFi coverage, providing both wired and wireless connections.2. The external antenna can receive the WiFi signal.3. Support AP mode, create a new WiFi access point.4. Extend the wireless range by pressing the range extender button.5. Set the power plan of the range extender to save power.Two working modes:-Repeater mode (Repeater): wireless to wireless: In repeater mode, the repeater will establish a connection with a wireless router that can access the Internet wirelessly, and is used to amplify the wireless signal on the wireless router that can access the Internet. (Suitable place: There is a wireless router that can access the Internet, and it is hoped that the wireless signal can cover a wider range.)-AP mode (Access Point): Wired to wireless: connect the device to the broadband interface with a network cable, and then the wireless can be converted to wireless. (Places of use: hotels, rental houses, offices or other places where a network cable is provided)Specification:1. Protocol: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b2. Interface: 1 x 10/100Mbps LAN/WAN port3. Buttons: WPS button, reset button4. Antenna: 2 x external antenna5. Dimensions: (WxDxH) 67.0 x 55.0 x 36.0mm6. Wireless characteristics: frequency 2.4-2.4835GHz7. Signal rate: up to 300Mbps (dynamic)8. Receive sensitivity: 270M: -69dBm 10% PER9. Transmitting power: less than 20 dBm (EIRP)10. Wireless Mode: Repeater/AP11. Wireless security: 64/128/152 bit WEP WPA-PSK/WPA2-PSK Package contains:1 x repeater1 x instruction manual1 x network cable