WIFI Signal Scanner 2.4-inch TFT Color Display 2.4G/5G WIFI Signal Usage Analyzer Router Management Assistant

Description In the same environment there are too many wifi signals multiple signals occupy the same frequency point and affect each other which will cause the quality of your own wifi signal to be poor Using this assistant you can easily check which frequency point has more signals If the frequency point is relatively free you can adjust your own wifi switch the frequency point to a relatively empty frequency point and improve the communication quality of your own wifi Function 1 Display the battery level in the upper right corner of the screen 2 Built in 600mAh lithium battery the working current is about 160mA and the standby time is about 4 hours 3 Built in lithium battery charging management circuit The charging time is about 2 hours 4 Use TYPE C interface to charge very convenient5 The charging voltage is 5V When charging the red light means charging and the green light means fully charged6 2 4 inch TFT color display Instructions 1 Long press the button to power on long press again to power off2 Press the button once to start scanning press the button again to suspend scanning3 The waveform on the top of the screen shows all the wifi signals in the 2 4G frequency band Originally only the wifi signal with the strongest signal is displayed However if there are multiple signals at the same frequency point they will be displayed in numbers below the corresponding coordinate scale For example if the number 5 is displayed it means that the