W2026C DC 12V 10A Digital Hygrometer Humidity Meter with Red/Blue LED Display Hygrometer Adjustable Humidity Controller

Specifications Control humidity range 1 RH 99 RHLoad power 10A DC12VHumidity measurement range 1 RH 999 RH Measurement error 3 RH good environment temperature is 25℃ Control humidity accuracy 1 RH display 1 RHHumidity return adjustable between 1 50 RHSupply voltage DC12VOutput type 10A relay outputProbe type humidity resistance sensorSize 48 29 22mm Installation hole 46 27mMoisture control object dehumidification or humidificationProbe line length 1 5m line lengthWorking environment humidity 90 RH no frosting Parameter Code and Settings CodeDescriptionrangeFactory settingsP0Humidification dehumidificationH CCP1Backlash1 50 RH P2Set the maximum limit9995P3Set the minimum limit15P4Temperature correction 1010P5Delayed start0 101P6Restore Factory settingsON OFFOFFSetting Instructions 1 Connect the power supply and load to power the controller The red color above shows the humidity blue below is displayed as the desired humidity 2 Press STG ENT to set the required humidity After the setting is completed wait for 3 seconds to automatically confirm the return At this time the controller automatically performs relay energization according to the setting 3 Press and hold SET for 5 seconds to enter the main menu settings press SET ENT to switch P0 P8 when adjusting parameters P0 P8 parameters4 If you need to adjust P0 press SET button ENT at the same time adjust 0K then control SET ENT Note For 10A relays