USB 3.0 PCI-E Riser Card Extender Adapter PCI-E Expansion Card Mining Cable

Specification: 1. color: blue 2. Material: copper, PVC 3. Size: 12.6x4.2cm/5"x1.7" (USB cable length 60cm/24") Description: 1) Perfect accessories for BTC litecoin mining. 2) With SATA Power supply cable. 3) Via 50cm USB3.0 cable connect design. 4) Extends graphics card GPUs and away from the laptop miniPCIe install graphics card GPUs. 5) c Features: 1. The card power supply uses four FP solid capacitors to make the graphics card power supply more stable and safe. 2. The riser card with 6pin or large 4PIN interface to enhance power supply, so that the graphics card power supply independent from the motherboard, thus reducing the burden on the motherboard when multiple video cards. 3. The graphics card slot adopts the original product connector, so that the graphics card contacts better. 4. PCI-E connector uses multi-layer shielded wire, can be connected up to 3M without attenuating the signal. 5. The wire is relatively soft, easy to route, and you want to put the video card to put it. 6. The PCI-E connector plug is fully gold-plated, more wear-resistant and increased in electrical conductivity. 7. The slot has a fixed clip to facilitate the removal of the graphics card and the fixed graphics card so that the video card does not fall out of the slot. Product Scope and Uses: 1. Applicable to products: 1X, 2X, 4X, 8X, 16X compatible (1-16X and 16-16X can be used, circuit board PCIe extension cable, safer, more efficient, more practical. 2. Usage: Solve the problems of the traditional line welding point is vulnerable to burn, transmission signal attenuation, length of the cable is not enough and so on. Select the latest PCIe conversion line and solve all these problems. The interface of the laptop or video card is connected to a monitor or TV with an HDMI port. Precautions: 1. This extension cable is suitable for the motherboard PCI-E slot (1X 2X 4X 8X 16X). When using, please plug in the floppy drive power cord. When plugging or unplugging the PCI-E extension cable, be sure to disconnect the cable from the computer. Be sure to see the precautions when using it. 2. The matching wire is custom-made. Do not simply insert the wire. Remember. 3. When inserting the wire, be sure to read the direction. Do not insert the reverse or insert the wrong position to prevent the device from being burned. When inserting the wire, first hold the device's socket and re-insert the wire to avoid overpowering the socket pin. 4. The big 4pin is the power standard. Please check whether it is plugged in when inserting the power. Be careful when inserting or unplugging the cable. 5. Dual-core graphics card is recommended to use the old cable, the motherboard is 16X also recommended to use the old cable. . . Package Included: 1x PCI-E riser adapter