Twisting Tool Galvanized Wire Doubling Device For Electric Maintenance

Twisting Tool Galvanized Wire Doubling Device for Electric Maintenance Specification: Item Type: Wire Twisting Tools Material: Stainless steel galvanized Style: Electric How to Use: 1. Wire rehearsal and neat jacks (one wire must be inserted into the No. 1 hole and the rest are discharged at will) 2. The must clamp all the wires (not tightly clamped may cause no peeling and disconnection). The wires must be lined up and clamped on the (four wires must be used with needle-nose ) 3. 5pcs 2.5 or 2pcs 4 drill torsion is about 8-10 3pcs 4 drill torsion is about 12-15 4. Only one wire can be inserted into each inlet hole Package List: 2 x Wire Twisting Tools Note: The electric model needs to be used with an electric drill. The vise should be tightly clamped against the wire doubling device and three or more wires need to use an electric drill above 16V. The torsion of 5pcs 2.5 and 2pcs 4 drills is about 8-10 and the torsion of 3pcs 4 drills is 12 -15 or so.