Tire Inflator Portable Air Compressor Rechargeable Battery Powered Tire Pump with 3 Nozzles 12V Car Electric Air Pump with LED Light for Car Motorcycles Bicycles Ball

Features:
Multi-Purpose: Our air pump is not only suitable for 12V car tires, but also for motorcycles, bicycles, balls, rubber boats, beach floats, inflatable toys, etc.
Pure Copper Motor: Accelerates heat dissipation, continuous inflation without heating, no gear structure, no impact noise, and reduces noise.
Accurate Pressure Measurement: The display shows the preset value and battery power, which is convenient for observation and operation at any time. Four modes can be preset. It will automatically stop when the set pressure is reached to prevent over-inflation.
LED Light: Designed for versatility, this car tire inflator comes with its own light, perfect for emergencies or nighttime use. The bright LED light illuminates your work area so you can safely inflate your tires even in low light conditions.
Space-Saving and Easy to Store: The power cord and inflation tube of the air pump can be stored on the back of the machine. Its compact size and portability, as well as the included tool box, make it very convenient and easy to store.
Instructions for Use:
1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has been circulated. Continue to tighten the air nozzle. At this time, the air will no longer leak.
2. Insert it into the DC12V cigarette lighter.
3. When inflating, the instrument pointer rises with the saturation of the tire. When the pointer reaches the appropriate tire pressure (the tire pressure of a general car tire is 223kpa=35PSI), remove the plug and the air nozzle, and the work is completed.
4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect to the air nozzle to inflate balls and other equipment that require air.
Notes:
1. Do not use it to inflate tires of large and overweight vehicles, such as trucks, large vans, and box-type container trucks;
2. Please start the car engine to increase power when using it, and do not consume the power of the car battery;
3. This machine is limited to using DC (DC12V) power supply, and cannot use household high-voltage AC (AC220V) power supply;
4. When inflating, please stop the machine for 10 minutes after 10 minutes of continuous operation to cool down to prevent damage to the air pump and accessories, and to extend the life of the motor. When inflating a rubber boat, it can work continuously for 30 minutes;
5. When inflating a general tire, it takes about 3-5 minutes to reach the normal tire pressure of 30PSI, and it will take a little longer for a large tire; if the pointer of the instrument quickly rises to 50-100PSI when starting to inflate, it means that the air is blocked and the air does not enter the tire. At this time, you need to unplug the air nozzle connector immediately and operate it again, otherwise the motor and instrument will be easily damaged.
6. Do not leave the machine when using it. Pay attention to the tire pressure at any time. Do not oversaturate it.
7. After using the machine, the air nozzle wrench must be straightened to prevent the elasticity of the rubber inside from fatigue.
8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);
9. The machine should be kept away from moisture, heavy falls, sand and mud, and children should not play with it to avoid damage.
10. The pressure required for each tire is different. Please refer to the markings on the side of the car tire or ask the car manufacturer.