Tilta Camera Cage Kit C for Sony A6 Series

This kit of the Sony a6 cage will help to fully build out your setup. It includes: the base Sony a6 cage, a quick release top handle, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as 15mm rods for the plate), a 15mm single rod mount that attaches directly to the cage, an HDMI to Micro HDMI adapter, a clamp to attach the HDMI adapter and a R/S cable comfortably to the cage, and finally the Tiltaing Side Focus Handle Type I (F570 Battery) along with the compatible Sony a6 series R/S cable for the Nucleus Nano.- Full Camera Cage for Sony a6 Series -This "full" camera cage provides complete protective armor for the Sony a6000, a6100, a6300, a6400, a6500, and a6600 cameras. It provides several 1/4"-20 and 3/8"-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.- Quick Release Top Handle -This quick release top handle easily and securely attaches to the top of the half and full Tiltaing camera cages. It provides several 1/4"-20 and 3/8"-16 mounting points as well as one cold shoe mounting point on the front and one on the back of the handle.- Tiltaing ARCA Quick Release Plate -This Arca-Swiss compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages to allow you to quickly and easily attach and detach from Arca-Swiss support systems.- Tiltaing Manfrotto Quick Release Plate -This Manfrotto-compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages to allow you to quickly and easily attach and detach from Manfrotto support systems.- HDMI to Micro HDMI Adapter -This cable is for use with the Tilta Camera Cage for Sony a7/a9 Series and Tilta Camera Cage for Sony a6 Series. It adapts the Micro HDMI port in the camera to a female HDMI, allowing for the connection of an external monitor and/or transmitter using a regular HDMI cable.- Side Focus Handle Type I (F570 Battery) -This side handle slides onto the base of the half and full Tiltaing camera cages. A battery port on the bottom of the handle allows you to use a Sony F570 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle.A built-in finger wheel allows you to control the Nucleus Nano motor through a wired connection and a run/stop button allows you to control the record start/stop function of your camera through an optional Nucleus-Nano R/S cable (for cameras that support this function).- Nucleus-Nano Run/Stop Cable -This cable for the Nucleus-Nano motor give you run/stop capabilities for Sony a6/a7/a9 camera systems.- 15mm Bottom Single Rod Holder -This 15mm single rod holder can attach to the bottom of the half and full camera cage to allow you to place a 15mm rod off the bottom of the camera for attaching accessories.- 15mm Aluminum Rod -Rods for use with the 15mm LWS Baseplate.- 15mm LWS Baseplate Type II -This 15mm LWS baseplate easily slides onto the base of the Tiltaing half and full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9. It provides 15mm LWS rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.