Temperature Recorder Ergonomic Practical Great Material Beautiful For Home TempU05

Temperature Recorder Ergonomic Practical Great Material Beautiful for Home TempU05 Specification: Condition: 100% Item Type: Temperature Recorder Material: Plastic Color: As shown in the picture Size: Approx.67x28mm/2.64x1.1inL x WWeight: Approx.13g/0.5oz Type: Single use Log Interval: 10 minutes Accuracy: ?0.5 degrees Celsius -20 degrees Celsius ~+40 degrees Celsius Out of Range: ?1 degrees Celsius Data Capacity: 10000 Alarm Temperature Range: < 2 degrees Celsius or > 8 degrees Celsius < 35.6? or > 46.4? Start Delay: 30minutes Working Environment Temperature: -30 degrees Celsius ~+60 degrees Celsius Battery: 210mAh CR2032 BatteryIncluded Instructions: 1. Press and hold the ?Start/Stop? button for more than 3s the ?OK? indicator will be on for 3S indicating that the device starts recording and then you can place the device in the environment you need to monitor. 2. During the recording process the device will automatically light every 10s. If the normal indicator light ie green light is lit every 10s it means that the device is not over temperature during the recording process. If the alarm indicator light ie red light is illuminated every 10 seconds Explain that over-temperature has occurred during the recording process. Note: As long as over-temperature is found during the recording process the green light will no longer illuminate. 3. Press and hold the ?Start/Stop? button for more than 3s the alarm indicator ie red light will be on for 3s indicating that the device stops recording. The recording will also stop automatically when the device is full. After the device stops recording it will not automatically flash. If the device is over-temperature during recording press the ?Start/Stop? button. If the normal indicator green light is on it indicates that the temperature is not over-recorded during the recording; if the alarm is When the indicator light ie red light is on it indicates that the temperature is over temperature during recording. 4. Remove the waterproof packaging bag and insert the device into the computer USB interface. During the PDF file generation process the normal indicator light ie green light and the alarm indicator light ie red light will turn on. When the file is generated the normal indicator light ie green light It will remain lit until the recorder is removed from the computer. Package List: 1 x Temperature Recorder Note: 1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Do not disassemble the packaging. Before testing turn on the machine press Start and the light will be on for 10 seconds indicating that the product is and it will start recording after 30 minutes of power on don t press STOP and plug in the computer press stop don t press STOP if you don t want to record and plug in the computer This product can no longer be used after one time.