Speed RPM Display Stepper Servo Motor Driver Controller Board Speed Adjustable Reversal Fixed

Description CS10 3 pulse generator can control stepper motor servo motor motor speed 0 0 1000 rpm square wave stepless adjustable ExternalStart and stop direction can achieve external control With speed regulation and fixed length function Instructions 1 Display description In the running state or stop state the digital tube displays the current speed value in units of rpm Display the parameter code or parameter value of the setting in the setting status2 Parameter setting press and hold press and hold Key ACC appears press againKey appears ACC parameter value presswithKey modification modify the pressConfirm return to ACC status presskeyThe tAb appears press Modo again then click to display Model then press to return to ACC parameter setting with ACC pressKey exitThe parameter is set to the stop state ACC acceleration setting 1 99 1 fastest 99 fastest load reset slower default value 5tAb Subdivision number setting 1 64 This value is set according to the drive and should be set to the same as the drive Speed default value 10 RunWhen 0 1 is set to 0 the power on is stopped When set to 1 it will run when powered on The default value is 0 IN S operation stop input settingDefault 00 Terminal 3 Turn on and start open and stop direction is terminal 4 Turn forward reverse1 Terminal 3 Press once to start press again to stop direction is terminal 4 Press to stop2 Terminal 3 Press once to start terminal 4 to stop3 Terminal block 3 Press forwar