Specific Jack Pad for Tesla Model 3 Chassis Car Jack Lift Point Pad Adapter, Silver, 501 Original

Descriptions:This jack pad features a Neoprene washer that won\\'t damage the painted surface of the jack points. The simple round design assures that the tool will be inserted into the jack point correctly, whereas, rectangular shaped tools can be inadvertently inserted with the incorrect orientation.It is specifically designed for Tesla Model 3 chassis. A Neoprene washer included with the jack pad tool protects the painted surface of the jack point from being scratched. The jack pad tool hangs from the jack points on your car. This feature makes it very easy to align your floor jack with the jack point.The 63mm diameter by 28mm tall tool is machined from Acetal bar stock and uses a Silicone O-Ring to provide a friction fit with the vehicle jack point. Acetal is an extremely strong and durable engineered plastic. This jack pad tool will not flex under load. No modifications to the jack points on your car are required to use this jack pad tool. Simply insert the tool into the hole in the vehicle jack point. The jack pad adapter will be suspended from the jack point until you can position your floor jack beneath the adapter. You can now safely lift the car without damaging the side skirts or undercarriage with the rim of the floor jack saddle.The O-Ring provides sufficient \\\"grip\\\" to hold the tool in place during maintenance procedures. The Neoprene washer protects the paint on the jack point from being damaged. The groove around the perimeter of the tool provides a convenient finger grip for removing the tool from the jack point. An optional 15mm extension is available for applications where more clearance is desired between the chassis and the arms of a two-post lift or the frame of a floor jack. The tool is not intended to be permanently installed.This jack pad tool should be used with a floor jack with a flat bottomed saddle that is at least 3-inches in diameter and no more than 3/8-inch deep. Four of the jack pad tools can be used with a four-arm lift to increase the clearance between the lift arms and the vehicle side skirts.FAQsQ. Will this jack pad tool work for Tesla Model S or Model X?A. Yes, this tool can be used for Model S and Model X jack point. However, the post on the tool is sized for a Model 3 jack point. The tool will not fit snugly in the Model S and Model X point and will have to be held in place while a floor jack is positioned beneath the jack point. We recommend using our tool with a larger diameter post for the Model S and Model X chassis.Q. Why is there a bolt in the bottom of the jack pad tool?A. The counter-bored threaded hole facilitates the manufacturing of the tool. It also allows for the attachment of an optional 15mm thick extension for anyone who requires a taller jack pad tool for their application.Q. Why isn\\'t a magnet used to suspend the jack pad tool from the chassis?A. In order to use a magnet the post on the tool would have to be longer to position the magnet close to the chassis. It incorporates a 2mm thick Neoprene washer to protect the surface of the painted vehicle jack point. If the post were taller and the tool was used without the washer, the magnet could shatter under the weight of the car. Also, shipping magnets Internationally requires special handling to comply with airline regulations.Specifications:Color: Black/ Red/ Blue/ SilverSize: 98*78*72 mm/3.86*3.07*2.83\\\"Weight: 295 gApplicable models: for Tesla Model 3Notes:1. There may be slight size deviations due to manual measurement, different measuring methods and tools.2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.Package Content:1 X Jack Pad