Solar/USB Powered Alarm Light Remote Control Human Body Induction Infrared 129dB Sound and Flashing Strobe Light Alarm L

Specification Model N911CPower Method Solar Powered USB PowerSolar Panel 5V 120mA PolysiliconLED 8pcs Flashing Red LEDBattery 3 7V 1200mAh Lithium BatteryMaterial ABSWaterproof Level IP65Sensing Angle 125°Alarm Decibel 129dBWeight about 0 22kgLamp Size 90 140mmCharging Time ≥10hWorking Time Sound and Flash Light alarm for 45s 300 times Lamp powers off standby 120 days Remote control power off standby 5 daysSensing Distance 5 8 meters Affected by surrounding environment and temperature Remote Control Range 10 metersFuntion 4 Alarm Modes Supports Remote Control One remote could control ≥2 units Instruction 1 The first time you press the ON OFF switch remote control A key the product will emit beep sound it will enter the 24 hour sound and light alarm mode it will slow flash at intervals for about 30 seconds the product is to be activated during this time it will not emit sound alarm and then enter the active state 2 Press the ON OFF switch for the second time remote control B button the product will emit a beep sound it will enter a 24 hour flashing and silent alarm mode only flashing no sound the product will slow flash 2 times at intervals for about 30 seconds and then enter the active state 3 Press the ON OFF switch for the third time remote control C button the product will emit a beep sound it will enter the night sound and light alarm mode not working during the day only working at night the product will flash 3