Solar Panel Module Aluminum Bracket Rail Fastening Rail Trapezoidal Roof Mount

Product Description Features: *Brand new and high quality *Application: T20 short rail for trapezoidal sheet PV mounting. on trapezoidal sheet metal roofs with sheet metal outer skin. *Material T20 profiles: aluminum alloy AL6005-T5 1.00 KN *Requirement - trapezoidal sheet minimum sheet thick steel 0.5mm / aluminum 1.00mm. *Good static load distribution. This type of installation reduces the suction effect on the outer skin of the roof covering by the weight of the PV system. *No transport of long profile bars - adjusted to the bead spacing of the profile sheets. *The profile sections are pre-punched and covered with sealing tape. Assembly 1. Roof division depending on module dimensions 2. Align the row using a chalk line. 3. Place the T20 holder in position pre-drill with a Ø 5.00 mm sheet metal drill and fasten with 4 blind rivets. Alternatively: fasten with thin sheet metal screws without pre-drilling. 4. Place the next rows using a wooden template. After 10 rows check the direction again with a piece of string. Details: *Material: Aluminum alloy *Color:silver Style: For 2 solar panel：6x rails+4x end clips+2x middle clamps， For 3 solar panel：8x rails+4x end clips+4x middle clamps， For 4 solar panel：10x rails+4x end clips+6x middle clamps； Rail Size: 200mm Middle clip: for solar panel 30mm for solar panel 35mm End clip: for solar panel 30mm for solar panel 35mm Note：Middle clips and end clips purchase the corresponding size set according to the thick of your solar panel Package Contents: 6x Rails（with accessories Gasket+Screw）+ 4x end clips+2x middle clamp Or 8x Rails （with accessories Gasket+Screw）+4x end clips+4x middle clamps Or 10x Rails （with accessories Gasket+Screw）+4x end clips+6x middle clamps information: