SmallRig Master Kit with Camera Cage and EVF Monitor Mount for RED KOMODO

SmallRig Master Kit for KOMODO 3208 includes a form-fitting full cage to protect the camera. Its baseplate supports ARRI-type quick release plate, allowing easy adjustment for the center of gravity while shooting; its built-in Manfrotto quick release plate enables a quick switch between the handheld shot and tripod shot. The wooden grip made of rosewood is ergonomically designed for a better grip experience. The monitor mount locks the monitor perfectly and can be swiveled 360 Degree and tilted 170 Degree .

Note: When using Monitor Mount 2906, please re-tighten the equipment via screwdriver for further security (weighing no more than 1.5kg).


- Camera Cage -
SmallRig Cage 3046 for RED KOMODO is designed to provide multiple mounting port for shooting. It's magnesium-aluminum alloy make the cage sturdy and durable and 40% lighter than the aluminum alloy one and weighs only 186g. The scientific combination of ARRI rosette mount and threaded holes can be compatible with the side handle such as 2915, and top handle such as HTN 2758.

The hole distance on the top of the cage is the same as that of KOMODO and is compatible with KOMODO original handles. Multiple 1/4" -20 and 3/8" -16 thread holes are scientifically designed at the bottom, compatible with Manfrotto quick-release plate 1280 and ARRI base 1642. More reasonable thread hole arrangement at the bottom to keep an excellent balance for shooting & protect the camera.
Features
• Dedicated Cage for RED KOMODO
• Only 186g, weight reduced by 40% than normal by using magnesium-aluminum alloy material
• NATO rails are designed in three sides of the cage and make it convenient for quick release
• Well designed ARRI rosette mount, NATO rail and threaded holes to achieve a variety of hand-held shootings• The same hole distance on the top of the cage as that of KOMODO, so it is compatible with KOMODO original accessories- EVF Monitor Mount -
SmallRig EVF Monitor Mount for KOMODO 3045 connects monitors via one 1/4"-20 screw and connects KOMODO or cages via two 1/4"-20 screws. It tilts 170 degrees, swivels 360 degrees, and can be stopped at any angle with a load capacity of 1.5kg while the tightness is adjustable on each axis. Its top and bottom come with silicone paddings to prevent scratching and increase friction. It features 1/4"-20 holes, available for mounting other accessories at will.
Note: Please re-tighten your equipment using the screwdriver for further security
Features
• Tailor-made monitor mount for KOMODO• Supports 5" and 7" monitors up to 1.5kg
• Tilts 170 Degree and swivels 360 Degree
• Tightness adjustable on each axis
• Slots on screwdrivers for tightening the mount
• Secured via two screws with anti-fall design
• Anti-scratching paddings
- 15mm LWS Universal Lens Support BSL -
SmallRig 15mm LWS Universal Lens Support BSL2644 is designed to remove the weight stress from camera's lens mount when your camera is mounted on separately available 15mm LWS rods. The lens support offers 6mm horizontal and 22mm vertical adjustment to fit most lens. The 15mm LWS rod ports have a half-open design so the support can quickly mount and unmount without removing other rod-mount accessories. The center column attaches to a Y-support with a 1/4"-20 screw and the Y-support features strap slots on each side for further secure.

Note: Please understand that the color in actual product may vary slightly from the color in the picture due to variations in lighting and devices you might be using.
Features• Universal Lens Support with Brand-New Dark Olive Finish
• Y-Bracket for Lens
• 6mm Horizontal Adjustment
• 27.2mm Vertical Adjustment
• Half-Rod Clamp Design for Quick Release

- Right Side Wooden Grip -
SmallRig Right-Side Wooden Grip with ARRI Rosette 1941B is designed to mounts onto any camera rig via ARRI-standard rosette with a range of 360 Degree adjustable. The handle could be installed on the right side of camera cage, plate and ARRI rosette arm for increasing stabilization, it also works well with camcorders such as RED, URSA Mini, Sony FS7 etc. The ARRI rosette is up and down adjustable via detaching the two M4 screws. Featuring a hex spanner on the bottom allows for height adjusting and reinforcing the thumbscrew, also helps to detach the handle in seconds. The center M6 screw could be removed for use with a rig requiring a female thread. The integrated material of wooden and aluminum reduce the weight of the handle, and also works well in the situation of low temperature which leads to a higher quality user experience.

Note: Affected by the natural rosewood, color difference can't be avoided, not quality problem.
Features• Ergonomic Right-Side Handle with ARRI-Standard Rosette
• Height Adjustable ARRI Rosette• Integrated Hex Spanner in the Bottom
• Male/Female Design with Removable Screw
• Aluminum Alloy & Rosewood Construction
- 15mm Carbon Fiber Rod -
It is the new version of carbon fiber rod with more smooth surface. It fits 15mm rod clamp but its surface is not shining any more because we have redesigned it based on some customers' advice.The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable.