Servo Signal Converter Professional Delay Slow Converter RC Model DIY Upgraded

Servo Signal Converter Professional Delay Slow Converter RC Model DIY UpgradeDescription High quality for professional useLightweight and compact do not affect the performance of your model3P cable length 10cm and plug design easy to useThis advanced servo converter can adjust the positive and negative and the rudder angleAlso increase the delay or slow execution functionSpecification Board size Approx 25x12mmWeight About 2gAdaptable voltage 3 6 16V more than poked with high voltage servo Output supply voltage input supply voltageOutput General PWM servo signalOutput signal frequency 50Hz if you give 300Hz signal as input the output is also 50Hz Generally the remote control output servo signal is 50Hz high frequency is used in special occasions Applicable servos should support 500 2500us 180 degree turn servos most servos support 180 degrees if the servo does not support for example only supports 800 2200us be careful when adjusting the steering angle If the signal exceeds the range the steering gear may be damaged In addition some servos are close to 180 degrees so be careful when adjusting to the maximum The difference between delay and slow speed Delay The servo does not move After the delay time it will execute immediately Maximum delay 4 seconds the knob is full Slow speed The servo executes immediately according to the set slow speed The speed can be slow enough to turn 180 degrees to take more than 20 seconds The knob is adjusted