Seapple Automatic Genset HGM6110K Generator Controller for Smartgen Genset Controller Diesel AMF Module

Product Description HGM6100N series automatic controller integrating digital intelligent and network techniques is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop data measurement alarm protection and three “remote” (remote control remote measure and remote communication). The controller uses LCD display optional display interface including Chinese English Spanish Russian Portuguese Turkey Polish and French with easy and reliable operation. HGM6100N series automatic controller uses micro-processing technique which can achieve precision measurement value adjustment timing and threshold setting etc.. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure simple connections and high reliability. PERFORMANCE AND CHARACTERISTICS HGM6100N controller has six variants: HGM6110N/6110NC/6110CAN: Automatic Start Module it controls generator to start/stop by remote start signal; HGM6120N/6120NC/6120CAN: Based on HGM6110N/6110NC/6110CAN it adds mains AC monitoring and mains/generator automatic switching control (AMF) especially suitable for the automation system composed by mains and genset. Note1: HGM6110NC/6120NC has RS485 port HGM6110N/6120N without. HGM6110CAN/6120CAN has CAN port HGM6110N/6120N and HGM6110NC/6120NC without. Note2: HGM6110/6120 is taken as an example to describe in this manual. 1. 132*64 LCD display with backlight optional language interface (Chinese English Spanish Russian Portuguese Turkey Polish and French) push-button operation; 2. Acrylic screen improved wearable and scratch resistance property; 3. Silica-gel panel and keys can well adapt to higher and lower temperature; 4. With RS485 communication port can achieve “three remote” functions via MODBUS protocol; 5. With CANBUS port which can be connected to electronic injection with J1939 it not only can monitor frequently-used data (such as water temperature oil pressure rotated speed and fuel consumption etc.) but also can control start stop high speed and low speed (controller with CANBUS port is needed) via CANBUS port. 6. Adapt to 3P4W 3P3W 1P2W and 2P3W (120V/240V) 50Hz/60Hz AC power system; 7. Can measure and display 3 phase voltage 3 phase current frequency power parameter of mains/gens; Mains Generator Line voltage (Uab Ubc and Uca) Line voltage (Uab Ubc and Uca) Phase voltage (Ua Ub and Uc) Phase voltage (Ua Ub and Uc) Frequency HZ Frequency HZ Load Current IA IB IC Active power KW Reactive power KVar Apparent power KVA Power factor PF Generator accumulated energy kWh 8. Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage over/under frequency over current and over power;