SWIT Electronics S-1093H 9" FHD 3G-SDI & HDMI LED Monitor without Battery Plate

The S-1093H adopts a 9-inch IPS (In-Plane Switching) LCD panel, with Full HD 1920x1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170deg. / Vertical: 170deg.. LCD Protective Glass The LCD of S-1093H is overlaid with a glass, protects the screen against scratch or broken. Embedded audio monitoring 2-ch meters with alert S-1093H supports SDI-2ch / HDMI-2ch embedded audio meters and Analog 2-ch audio meters display, with marks and audio abnormal alert info. The audio meter pattern position can be selected from one of four corners and the scale markers, alert info and translucent of the audio meter pattern are selectable. UMD and Text-Tally Display TSL 3.1 / 4.0 Protocol S-1093H supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor. USB Firmware Upgrade The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick and directly insert into S-1093H monitor to upgrade, without PC connection. 3-color TALLY Light - RJ45 (RS485) input signal There are front and rear TALLY lights of Red, Green and Yellow colors and users can define the pins of RJ45 port to control the TALLY lights. Sun Hood For outdoor using, you can apply a sun hood on the monitor. The sun hood can be easily installed via the left and right screw threads or directly by Hook and Loop tapes. Audio Meter Level - With abnormal alert info Support 2-ch SDI & HDMI embedded audio meters and analog audio meters display. The audio meter is green and will turn yellow when exceeds -20dB and turn red when exceeds -9dB. The audio meters support audio abnormal alert info display, for example if the channel has no audio signal, the audio meter position will display "UNLOCKED" and if the channel has audio signal but no volume, it will display "MUTE". The alert info and audio markers can be switched on or off and display position can be selected from 4 corners, also the translucence of the pattern can be adjusted. GPI Interface and Control The RJ45(RS485) port on the rear panel supports UMD control and GPI functions setting and control. There're 4 GPI pins and can be assign the following functions, by shorting with GND pin to enable the functions.