SUITU ST-5002 DC 12V Wired Car Air Compressor Tire Inflator 150 PSI Auto Air Pump Digital Display Model

1. A pump that girls can also use. Charge and stop, no need to look, electric shock start after preset tire pressure, full stop2. Equipped with a set of inflatable nozzles, which can be used to inflate automobiles, motorcycles, bicycles, balls and other equipment that need to be inflated3. High-performance pure copper motor, lower power consumption, lower noise and longer service life4. The fuselage is equipped with high-brightness LED lights, no other lighting tools are needed for inflating at night, just press the lighting button to turn on the lights5. The hidden wire groove is beautiful and practical, and can accommodate wires and air pipes.6. The three-meter-long power cord provides a large enough inflation range for various models, ensuring that all four wheels can be inflated.7. There are two styles to choose from. It is recommended to purchase a digital display model. The digital display model is more convenient to inflate than the pointer model, and the operation is easier. Specification:1. Material: ABS2. Output power: 120W3. Rated voltage: DC 12V4. Lighting: LED5. Product size: about 14.5 x 6 x 20.5cm6. Power cord length: about 300 cm, trachea length about 50 cm7. Weight: gross weight about 800g Instructions for use:1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has been circulated. Continue to tighten the air nozzle. At this time, the air will not leak out.2. Insert it into the DC12V cigarette lighter3. When inflating, the pointer of the meter rises with the saturation of the tire. When the pointer reaches the proper tire pressure (generally, the tire pressure of a car tire is 223kpa=35PSI), take out the plug and the gas nozzle, and the work is completed.4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the ball and other air-requiring equipment.Precautions:1. It cannot be used to inflate tires of large and overweight vehicles, such as trucks, large trucks, box-type containers, etc.;2. Please start the car engine to increase the power when using it, and do not consume the power of the car battery;3. This machine is limited to DC (DC12V) power supply, and household high-voltage AC (AC220V) power supply is not allowed;4. When inflating, please stop for 10 minutes to cool down after working continuously for 10 minutes, so as to prevent damage to the air pump and accessories, and prolong the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;5. When the general tire is inflated, the normal tire pressure of 30PSI can be reached in about 3-5 minutes, and the large tire will take a little longer; if the pointer of the instrument rises rapidly to 50-100PSI when the inflation starts, it means that the air is blocked , the air does not enter the tire. At this time, the air nozzle connector must be unplugged immediately and operated again, otherwise the motor and instrument will be easily damaged.6. Do not leave the body when using it, pay attention to the tire pressure at any time, and do not oversaturation;7. After using the machine, the valve wrench must be straightened to avoid fatigue of the rubber inside;8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);9. The machine should avoid moisture, heavy fall and sand and mud intrusion, and avoid children playing with it, so as not to be damaged;10. The pressure required for each tire is different, please refer to the label on the side of the tire, or ask the car manufacturer