SONOFF Zigbee 3.0 USB Dongle Plus

How to add Zigbee devices to home assistant via SONOFF zigbee 3.0 USB dongle plus. SONOFF Zigbee 3.0 USB Dongle Plus is a universal Zigbee USB stick. It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don't need to invest in the Zigbee hubs for different brands, all you need is a universal gateway - Dongle Plus! The dongle plus has a wide range of supported devices, such as BASICZBR3, S31 Lite zb, SNZB01, SNZB02, SNZB03, SNZB04, ZBMINI, S26R2ZB , and various sub-devices from various brands or flash router firmware to extend the network range. The limits of ZBDongle Plus are 21 direct children and up to 40 children (Default values from official firmware). If you want to connect to 50 direct children and up to 200 children, flash the latest firmware by yourself. Please refer to this link: Z-Stack-firmware/coordinator at master · Koenkk/Z-Stack-firmware · GitHub Install Driver Note: Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first. Windows: CP210x_Windows_Drivers_with_Serial_Enumeration Package includes : 1 * Zigbee 3.0 USB Dongle Plus 1 * Antenna 1 * User Manual Documents: User Manual Firmware Flashing Guide,

• Pre-flashed with Z-Stack 3.x.0 coordinator firmware


• Can use ZHA in Home Assistant or use Zigbee2MQTT


• Base on TI CC2652P + CP2102N


• +20dBm output gain


• SMA interface external antenna


• Aluminum housing effectively reduces signal interference from peripherals


• Optional 1.5m USB extension cable for better signal range

SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:

Router: ZBMINI smart switch, S40 Lite ZB smart plug, S31 Lite ZB smart plug, S26R2ZB smart switch
End Device: ZBMINI-L smart switch, SNZB-01 switch, SNZB-02 Temp. and Hum. sensor, SNZB-03 motion sensor, SNZB-04 door/window sensor