RoverC Programmable Omnidirectional Mobile Robot Base Compatible with M5StickC STM32f030f4 Microcontroller

Description RoverC is a programmable omnidirectional mobile robot base compatible with M5stickC and can be started by inserting the M5stickC The main controller of the base is the stm32f030f4 microcontroller The base comes with N20 worm gear motors which are directly driven by a four channel motor driver These motors are connected to mecanum wheels which can move in all directions In addition two grove compatible I2C ports are provided to facilitate the expansion for other modules The base is also compatible with LE GO bricks and can be expanded in structure A 16340 battery is installed on the back of the base to meet the power and endurance requirements of the car and can be controlled by an independent switch Product Features I2C Address 0x38Remote ControlProgrammableFour channel motor driverLE GO compatibleExtra Grove ports for expansionEquipped with 16340 battery holderFlexible movement in all directionsInstructionsBurn the easyloader firmware of Joyc and roverc with two M5StickC respectively Insert Joyc and roverc respectively after burning After power on roverc will display the address name and battery power At the same time Joyc will scan the address name of roverc Long press the a key of M5StickC on Joyc and the work will be matched Left rocker up and down control front and back left and right control translation right rocker left and right control steering Usage Two M5StickCs will be burned into the EasyLoader firmware of JoyC and RoverC respective