Remote Control Durable Wireless Control Module Sensitive Small Size For Electric Door Window Lifting Equipment 3 Remote Control

Remote Control Durable Wireless Control Module Sensitive Small Size For Electric Door Window Lifting Equipment 3 Remote Control Specification: Item Type:Remote Control System Working voltage: DC12V Static working current: Less than or equal to 6mA Working temperature: –20°C to +60°C Receive sensitivity: 3-105dBm Working frequency: 433MHz Size:68 x 48 x 16.8mm / 2.68 x 1.89 x 0.66in This switch can be applied to the following two . 1. With 12V voltage output this only needs to draw a positive line from the input terminal to the common terminal and then share the input negative line to directly control the 12V device! 2. Directly connect the normally open end and the common end of the output side to other voltage circuits to control its opening and closing! Recommended control voltage range: 3V-250V current range: 0.1A-10A resistive load Remote Control Quantity:1/3/5Optional Package List: 1 x Module 3 x Remote Control Note: The power supply is recommended to use a DC regulated power supply or battery of 500mA or more. The receiving board can withstand up to 10A per channel and can directly drive DC/AC loads. Each relay has a set of normally open normally closed contacts. In order to extend the service life of the receiving board it is not recommended to control the high-power load. When controlling 220V it is recommended to control the maximum maximum of 500W inductive. When controlling 12V the maximum control is recommended to be 50W inductive.