Raspberry Pi 4B Development Board Cooling Fan Suitable for RaspberryPi Turbo Fan with LED Ambient Light

Features Compatible with Raspberry Pi 40P pin direct plug useThe bow foot identification is clear and the GPIO function is clear at a glance All GPIOs are led out heat dissipation does not affect development and useThe switch controls the cooling plate fan and LED It is recommended to keep it on when using Raspberry Pi 4B The height difference between the heat sink and the chip is specially increased to expand the negative pressure area and heat dissipation is more effectiveAfter installation the heat sink icon can show LED color light Special PCB technology is adopted and the glare effect because the raspberry pie board is blue the light transmission effect of blue LED is more obvious Using hydraulic bearing fan low operating noise and long service lifeThe fan can only reach a stable working state after running for 5 minutes and the temperature of the Raspberry Pi will gradually rise after turning on so it will not affect the use at all Specification Rated voltage DC 5VCurrent 200mABearing structure hydraulic bearingTemperature range 10 80°CSpeed 6000±5 RPMSize 64x59x10mmSuitable for 4B 3B 3B 3A Package include Type1 Cooling fan1 x Turbine cooling fan4 x Double pass M2 5x17mm copper pillar9 x ScrewType2 Cooling fan motherboard1 x Turbine cooling fan4 x M2 5x17mm Copper pillar4 x M2 5x8mm Copper pillar4 x M2 5x17 6mm Single pass9 x Screw1 x Acrylic base1 x Non slip matType3 Cooling kit1 x Turbine cooling fan4 x Double pass M2 5x17mm copper pillar9 x