Radiolink RTC8 SBUS/PPM to CAN Protocol Encoder Dual Signals Input for FPV RC Racer Drone

Radiolink RTC8 SBUS PPM to CAN Protocol Encoder Dual Signals Input for FPV RC Racer DroneFeatures Dual Signals Input SBUS and PPM signals can be identified and converted automatically is suitable for most remote controls Compared with the protocol transverter which with single SBUS signal the RTC8 greatly expands the options range of remote controls Easy to Convert the Signal The bit rate and the frame ID can be set by connecting the RTC8 parameters setup APP through the Type C cable No need to modify the original CAN protocol or find a manufacturer to customize the protocol to adapt to the converter parameters can be set as you need Parameters Visualization Display The parameter set APP can not only set the CAN protocol the bit rate the frame ID etc but also can observe the CAN and SBUS data at the same time which is simple and clear to troubleshoot Upgrade Online RTC8 users can download the latest upgrade firmware on the official website and then upgrade to synchronize the latest usage requirements Please upgrade by Windows system Real time LED Indicator Different LEDs switch automatically to identify whether the signal received is SBUS PPM or CAN data ①The blue LED flashes twice if the RTC8 receives the SBUS signal ②The blue LED flashes three times if the RTC8 receives the PPM signal ③The red LED flashes twice if the RTC8 receives the valid CAN data unshielded ID data Industrial Configuration Component selection software and hardware reliability des