RPi GPIO Status LED and Terminal Block Burst Caps for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Terminal Blocks

Description Product Name Terminal block hole moduleMaterial CopperRated Current 3 AMeter 26 0Voltage 3 3 voltsProduct Weight 40gFeatures 1 The product is soldered and assembled For Raspberry Pi A 3A B 2B 3B 3B 4B2 GPIO status LED and power 5V 3 3V indication GPIO output or input level high LED on output or input level low LED off 5V blue 3 3V red GPIO green The position of the LED corresponds to the position of the 2x20pin connector of the Raspberry Pi and the logiclevel of the GPIO can be observed very quickly and intuitively The drive current for each LED is only 0 1mA so you don t need to worry about it affecting the read and write status of the GPIO 3 Terminal pitch 3 5mm 0 138in wire size range from 26AWG to 16AWG strip length 5mm screw M2 steel pin and cage copper 2 x 20 pin extension pins 8mm 0 32in high Package includes 1 x Terminal Block Module4 x M2 5x16mm nylon brackets4 x M2 5x6mm nylon brackets4 x M2 5 nylon nuts Note This product does not include a Raspberry Pi board Notes 1 Due to the difference between different monitors the pictures may not reflect the actual color of the item 2 Please allow slight error due to manual measurement 3 Please leaving a message before you give the bad feedback if the products have some problems Thanks for your understandings