RC-210E Metal Lathe Electronic Pulse Precision Metal Bench Lathe 8 *24

Product Overview: Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. For example turning inside and outside cylindrical surface cone surface ring groove and forming turning surface turning end face and all kinds of commonly used metric thread cone surface ring groove and forming turning surface turning end face and all kinds of commonly used metric thread. The design of this new lathe is a great innovation it solves many disadvantages of other lathes in the past greatly improves the processing accuracy and processing efficiency can save a lot of precious time for you choose it you will not regret!! Product Parameters: Model: RC-210E Voltage: AC110V 50/60Hz(Brushless Motor) Power: 1100W(1.5HP) Length of center: 23.62 (600mm) Swing Over Bed: 8.27 (210mm) Rotary diameter of tool rest: 5.51 (140mm) Spindle bore: 1.50 (38mm) Diameter of chuck: 4.92 (125mm) Width of lathe bed: 3.94 (100mm) Thread standard: Metric/imperial/customized Turning delay start time: 1s-30s Number of Spindle Speeds: Infinitely variable speeds Range of Inch Threads: 10-44T.P.I Range of metric threads: 0.5mm-3mm Spindle taper: MT5 Knife rest labour: Horizontal four-station Spindle rotation speed: 50-2500rpm Precision of the spindle: 0.01mm Automatic feed range: 0.01mm-0.4mm Tail frame taper: MT2 Maximum stroke of tool rest plate: 2.16 (55mm) Maximum stroke of middle plate: 2.95 (75mm) Maximum stroke of bottom plate: 19.68 (500mm) Maximum stroke of tailstock sleeve: 2.36 (60mm) Package size: 41.7 *18.5 *20.1 (106cm*47cm*51cm) Net weight/Gross weight: 136.7LB(62kg)/178.6LB(81kg) Note:The yellow on the lathe bed and chuck is antirust oil Belong to normal phenomenon which can be wiped off with oil or gasoline before use.Be sure to clean the anti-rust oil on the chuck before starting and turn the chuck by hand to prevent the chuck from jamming and causing the circuit board to burn out!! Item Included(028353) Techtongda RC-210E lathe *1 Base oil pan *1 English manual *1 Oil can *1 Hexagon wrench *5 Open spanner *2 The screwdriver *2 Chuck jaw *3 Chuck spanner *1