RBR/C RB0126MG 26KG 90° 120° Large Torque Digital Metal Gear Waterproof Servo For 1/8/10 Crawler RC Car Boat Vehicle Rob

YES is waterproof No is not waterproof Product RB0126MG 25KG 90° 120° Large Torque Digital ServoDead band 4μsNeutral Position 1500μs 330hzMotor Core motorAngle 90 120°±2°Voltage Range 4 8V 6 0VOperating Speed 6 0V 0 15 60°Stall Torque 6 0V 26 kg cmDimensions 40 5X20X40 5mmWeight 57gConnector Wire Length JR 260mmBearing 2BB Features The steering gear has a slow start function it is difficult to see with the naked eye The current of the servo is relatively large at the moment of starting or reversing With this function the life of the steering gear is relatively long Blocking protection function When the servo is continuously blocked or the blocking angle is greater than 3 degrees the duration is 10 seconds and the current is kept at 2 5a or above the servo will start to protect the current will drop to the standby state and the blocking will be released When the remote control is turned freely the servos return to normal Adaptation range 1 8 or 1 10 remote control car steering can be used remote control boat etc Waterproof function The steering gear contains a total of 7 waterproof rings the structure is reasonable Each waterproof ring is installed in place the surface is not visible the circuit board brush special circuit board transparent glue the potentiometer is closed by silicone other structures are also corresponding Waterproof treatment Note Many launch tests on the market the steering gear can be tested without water but the