Power-Over-Ethernet HAT Board with 3007 Cooling Fan for Raspberry Pi 4B/3B+

Description The Power over Ethernet POE Module offers a convenient and cost effective way to deliver power to your device The module allows you to put a DC voltage onto specific pairs of the Ethernet cable so that devices connected to the network can use it as a power source The module is ideal for any space limited PoE applications such as IP cameras biometric readers RFID wireless access points HDBaseT extenders VOIP phones networked audio etc It s tiny size is a perfect match to the Raspberry Pi 4B and 3B in IOT and building automation applications It is ultimate power solution for Raspberry Pi 4B 3B It delivers clean and reliable power to the latest Pi 4 Warning PoE power output must be within the budget of the switch when powering multiple boards STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED The network switch or power sourcing equipment PSE must be compliant with the IEEE 802 3af or 802 3at PoE standard particularly section 33 4 1 with regards to PSE electrical isolation of the leads Passive PoE DC 24V or 48V is not standards compliant and may cause damage to equipment Do not use this product in an enclosed case without active air circulation Features Easy to assembleCompatible With Raspberry Pi 4 Model B Raspberry Pi 3 Model B Built in Cooling FanSupport IEEE 802 3af or 802 3at PoE standardHow to Use Paste aluminum heat sink to the chip on PoE HAT Fixed copper sticks to Raspberry Pi with M2 5 screws Install PoE HAT onto the 40 pin G