Portable Inflator Tyre Pump Air Compressor for Car Bike Tire NO BATTERY, Grey, 501 Original

150PSI Portable Inflator Mini Car Tyre Pump Air Compressor for Bicycle Tire Ball Inflatable NO BATTERYFeatures:This product is developed for the emergency pumping of high-pressure tires for bicycle international racing vehicles.It is also suitable for the inflation of ordinary bicycles, cars, motorcycle tires and balls, inflatable toys and other entertainment travel articles.Specifications:Car power input: 12V 3AInput voltage: car charger 5V/2AWorking current: 1-5AMaximum current: ≤5ANo-load current: ≤2AAir efficiency: inflate 1.95 mountain bike tires for 2 minutesBattery capacity: NO built-in battery (You need to connect it to car charger for normal use)Emergency lighting: 10 hours (at 80lm)Working temperature: -20~ +70 °CCharging method: Micro USBCharging time: about 2 hoursReachable pressure: 150PSI/10.3BAR/990KPA/10.5KG/CMProduct color: Black/ Grey/ SilverProduct size: 250*56*47mm/9.84*2.20*1.85\\\"Packing size: 289*70*73mm/11.4*2.76*2.87\\\"Net weight: 750gGross weight: 500gInstructions for use1. Insert the pin on one end of the charger into the car USB beforehand, and plug the other end into the USB socket on the top of the air pump to charge the air pump. The normal charging time is the first time after charging for 4 hours.2. Connect one end of the tire inflation fitting to the air cylinder and the other end to the tire valve core, then press the reverse button down. Please note that the order of the connections is important; at the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.3. Power on button, LCD display starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set button to set the air pressure value you need, and finally press The lower power switch starts to inflate, and when inflated, the bottom LED of the air cylinder is bright.4. Set button to pressure value setting button, press for slow adjustment, long press for quick adjustment, adjust to the appropriate pressing value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set .5. Press the power switch. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then the power switch is pressed to turn off the light.6. When the inflation is over, quickly rotate the tire inflation joint from the valve core or the counterclockwise. Before the screwing out, carefully put the tire inflation joints hot; if there is a small leak in the moment, it is normal.7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.8. Unscrew the tire inflation fitting from the main unit, insert it into the storage tank at the bottom of the air cylinder, and place the air cylinder in a safe, dry and ventilated position.Precautions1. Do not use this pump for children! Keep out of reach of children! Never insert the trachea into the mouth of the living animal, inflate the ears, do not use the pump as a toy!2. Do not use this pump in places close to flammable and explosive liquids and gases (eg gas stations)!3. Do not leave when the inflation is in progress. The machine must be allowed to rest for 8 minutes after 8 minutes of continuous use.4. When there is abnormal noise or excessive temperature during inflation, please turn off immediately and let it cool for at least 15 minutes. Disassemble the trachea and be careful with hot hands.5. The product is protected from rain and water, and it is resistant to impact and impact.6. If the pump is not used for a long time, it must be stored in a dry and closed place. If you store for a long time, it is recommended to charge the battery for three months.7. Check if the rechargeable air pump is fully charged before use. For the first time, charge for 4 hours. After each charge is full, the charging indicator will be fully charged.Warnings:For the safety of you and others, please use the pump and its accessories in accordance with the instructions provided by the manufacturer.Use methods not mentioned in the instructions may be dangerous.Notes:1. There may be slight size deviations due to manual measurement, different measuring methods and tools.2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.Package Content:1 X Inflator1 X Power Cord1 X USB Cable1 X Carry Case1 Set X Accessories1 X Manual