Point 2 Point 9m MultiMode OM4 LC/LC 1.6mm Patch Cord with PVC/FEP Plenum Jacket

P2P Patch Cords use a MultiMode OM4 MICRO BEND INSENSITIVE Corning ClearCurve Glass within the jacket. The UL Rated Plenum Jacket is a 2 Stand (DUPLEX) Patch Cord Cable in a Single Tube jacket for transmitting (TX) and receiving (RX). The nominal outer diameter for P2P Patch Cables in a single jacket is 1.6 mm versus conventional fiber duplex that measure 6.0 nominal outer diameter. P2P patch cords are equipped to fit in the bends of tight places within any indoor premise. The LC to LC Unibody Connectors provides the most flexibility for all your fiber optic projects and usage. LC to LC Patch Cords can be used in any channel from Data Centers, Pro AV, IT, FTTH, FITH, FTTD, Security, Hi Def Cameras, HDMI over Fiber for Indoor, Outdoor installations. CMP cable stands for "Communications Multipurpose Cable, Plenum", which is the so-called "plenum cable". It is designed to limit the amount of smoke emitted when it burns but mainly prevent flame from spreading to more than five feet. In areas where air travels throughout a building via plenum (air handling) spaces, it is critical that the cable is made of the material that doesn't give off too many toxic fumes if burned. When it comes to the difference between CMR vs. CMP, as the flammability requirements for CMP cables are stricter than CMR cables, plenum cables can always replace riser cables, but not the reverse. Plenum rated cables use more expensive PVC/FEP compounds to achieve the flame characteristics, resulting in a higher costing cable. LSZH (low smoke zero halogen) new emerging standard where zero toxins are released when burned, however the spreading of the flames is compromised. Reverse Polarity Uniboot Duplex patch cords allow for the quick and easy conversion from a TIA-568 A-B polarity to a TIA-568 A-A polarity without exposing the fibers or needing any tools. This patch cord comes with a straight-through polarity from the factory, but you can convert it to a flipped patch cord with no tools. This uniboot design allows one cable to carry both fibers, reducing patch cord bulk when routing.