PocketWizard 13377-S Remote Camera Cable for Sony Cameras

The 13377-S is a special remote shutter release cable called a pre-trigger cable. A pre-trigger cable controls both the half-press and full-press function of your remote camera's shutter release. When a camera is "pre-triggered", it is like holding your camera's shutter release button in the half-pressed or metering/focusing position.This -ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.NOTE: This cable is compatible with all PocketWizard radios.How to use:• Connect the 3.5mm miniphone end of this cable to the receiving Pocketwizard's sync port and connect the multi/micro USB port of the cable to Sony's remote port.• Turn on all of your equipment and make sure the Channels match.• Press the test button on the transmitting PocketWizard radio to trigger the receiving PocketWizard and your remote camera.Camera CompatibilityCompatible with Alpha cameras from Sony that have the multi/micro USB portRadio CompatibilityPocketWizard compatibility:All PocketWizard radiosHalf-press and Pre-trigger functions:Half press keeps the camera awake as long as you are half pressing the test button. This is available when using a Plus III as a transmitting radio and a Plus III radio as a receiving radio with Channels 17-32.Pre-trigger:Pre-trigger keeps the camera awake constantly. This is available when using a MultiMAX or MultiMAX II as a transmitting radio and a MultiMAX or MultiMAX II as a receiving radio with Channels 17-32. Pre-trigger function is also available with any PocketWizard radio by adding the PTMM adapter.