PS200 vector antenna analyzer meter 34.375mhz-2.7ghz for swr s11

rf vector antenna analyzer swr meter 34 375mhz 2 7ghz for resistor impedance swr s11 ps200 n1201sa illustrate The instrument has four interfaces single point measurement digitization system information calibration and calibration The single point measurement interface is initialized by default Note For the convenience of users the calibration option will automatically switch to user calibration each time At the same time in order to ensure the integrity of the calibration the automatic shutdown function is invalid during the calibration process and the startup is consistent Startup and shutdown Hold down the ctrl key and press the power switch button In the power on state press and hold more than 2s the switch button and the instrument will shut down after releasing it In the power on state press and hold more than 2s the switch button and the instrument will shut down after releasing it Notice You need to press and hold the second switch and the fourth switch at the same time to turn it on Recommended use 1 To ensure accurate measurements and calibrations allow the instrument to warm up for at least 15 minutes 2 Try to use good quality RF cables and connectors 3 The cable marked with calibration may not need to be calibrated next time and can be used directly 4 The technology of the test leads affects the measurement accuracy It is recommended not to choose too long test leads 5 Before measuring and calibrating please ensure that you are in an envir