PN-F RJ11 / RJ45 Network Wiring Finder Network Cable Checker POE Tester Anti-interference

1. Professional testing, efficient and accurate, plug and test, fast search2. Stable performance and long service life3. Fast and accurate, efficient and accurate, refuse to wait4. Split design, easy to use tester5. Anti-seismic and drop-proof, more suitable for construction site environment6. Small and convenient, easy to carry and does not take up space7. Main and auxiliary testers, split design8. Simultaneous testing, smooth connection to standard multi-port9. Transmission distance: greater than or equal to 3KM10. Host operating current: less than 10mA11. Auxiliary machine working current: less than 30mA12. Material: ABS13. Function: Network detection cable hunting14. Power supply: 9V DC laminated battery (not included in the product)15. Engine size: 140x75x30mm16. Receiver size: 220x48x32mm17. Net weight: 250g18. Gross weight: 0.4kgTelephone/network line hunting function:1. Directly plug the telephone line with crystal head into the telephone line hunting interface RJ-112. Turn the function selection switch of the transmitter to the SCAN position, the hunting indicator STATUS will flash, indicating that the transmitter is working normally3. Turn on the power switch of the receiver, and use the signal receiving head of the receiver to find the required target cable4. During the test, you can press the function switch button to switch between dual audioPower cable line hunting function:1. Connect the transmitter and the metal-finding wire through the alligator clip2. Turn the function selection switch of the transmitter to the SCAN position, the hunting indicator STATUS will flash, indicating that the transmitter is working normally3. Press the receiver's jog button down, and use the receiver's probe to inquire the desired target cable4. During the test, you can press the function switch button to switch between dual audioNetwork line proofreading function:1. Insert the RJ-45 connectors at both ends of the network cable to be tested into the corresponding ports of the transmitter and receiver respectively2. Turn the function selection switch of the transmitter to the TEST position, and the test indicator VERIFY will flash, indicating that the transmitter is working normally3. According to 18 line sequence indicators to judge the characteristics of line short circuit, open circuit, open circuit and crossover4. During the test, you can press the function switching button to switch between fast and slow gears