Out Garden Paving Pavement Mold Patio Concrete Stone Path Walk Maker Reuse Mould

Specification ColorBlackSize41 25cm 16 1 9 8 MaterialEngineering plasticsApplicable to 1 Self built houses DIY design corridors home roads balconies courtyards gardens vegetable plots landscapes swimming pools art floors 2 Villas plazas municipalities companies factories hotels resorts cafes clubs spas building designers and builders 3 Booth to set up the set designer 4 An advertising company that temporarily set up a set because of the need for advertising photography Instruction Step 1 Mix the cement with water according to the packing instructions When ready for use the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel Step 2 Fill the paver mold plow the concrete with a shovel and make sure to fill each area Step 3 Use rubber gloves to spread the concrete around the mold and fill any gaps or low points Tap the mold by hand to remove any air bubbles Step 4 Smooth the concrete according to theof the mold and wipe off the excess Step 5 Allow the concrete to set up to five minutes and carefully remove the mold For the next stretch rotate the mold a quarter turn and place it next to the paver you just finished If you are creating a curved path tilt it slightly Step 6 After allowing the concrete to solidify overnight fill the crack with dirt and rinse off the excess Wet the ground around the newly formed paver to help them settle Tip 1 Clean the concrete garden molds for reuse and spray w