Openlog Blackbox Cleanflight For Naze32 SP Racing F3 CC3D Flight Flash Micro Sd Data Recorder UART

Openlog Blackbox Cleanflight For Naze32 SP Racing F3 CC3D Flight Flash MicroSD Data Recorder UARTDescription:VCC input: 3.3V-12V (Recommended 3.3V-5V)Log to low-cost microSD FAT16/32 cards up to 64GBSimple command interfaceConfigurable baud ratesDefaut bootloader is pro mini atmage328P 5V 16MhzFour SPI pogo pinsTwo LEDs indicate writing status2mA idle, 6mA at maximum recording rateFeatures:OpenLog(blackbox) is a data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog(blackbox) can store or log huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates.The board has contained the openlog_blackbox_v2.0 firmware. Flight conroller transmits your flight data information on every control loop iteration over a serial port to an OpenLog to be recorded. After your flight, you can view the resulting logs using the interactive log viewer:https://github.com/cleanflight/blackbox-log-viewerYou can also use the blackbox_decode tool to turn the logs into CSV files for analysis, or render your flight log as a video using the blackbox_render tool. Those tools can be found in this repository:https://github.com/cleanflight/blackbox-toolsOpenLog configurationPower up the OpenLog with a microSD card inside, wait 10 seconds or so, then power it down and plug the microSD card into your computer. You should find a CONFIG.TXT file on the card, open it up in a text editor. You should see the baud