OWSOO M08 Meter Photometer Photography Set- Reflection Meter HotCold Shoe Fixing Meter

The meter is an instrument used to accurately determine the amount of exposure required by the subject. Features: Long standby time continuous metering for 26 hours. High accurancy 0.1~100 000 Lux. 32-bit MCU with high accurancy sensing. Support reflection metering incident metering. Support multiple -ports. Parameter memory function. Adjustable reflectivity. Specifications: Metering angle: 45° average metering (default reflected can also be set to incident ) Display screen: 0.96 inch 0LED Battery: 3.7V 300mAh Aperture : F1.0~F64 Shutter : 30S~18000S Working current: 8mA~10mA Standby current: 3.5μA Reflected EV : -2.0~19.0 Incident EV : -4.5~15.5 Exposure compensation : -5.0~+5.0 Three elements of exposure (gear description): Aperture F the of gear can be set as follows: F1.0 1.2 1.4 1.8 2.0 2.5 2.8 3.2 3.6 4.0 4.5 5.0 5.6 6.3 6.7 7.1 8.0 9.0 9.5 10 11 13 14 16 18 19 20 22 25 29 32 45 64 Shutter T the of gear can be set as follows: 30s 15 8 4 3 2 1.6 1.3 1 12 13 14 15 16 18 110 113 115 120 125 130 140 150 1 /60 180 1100 1125 1160 1200 1250 1 /320 1400 1500 1640 1800 11000 11250 11600 12000 14000 18000s Sensitivity IS0 the of gear can be set as follows: 6 8 10 12 16 20 25 32 40 50 64 80 100 125 160 200 250 320 400 500 640 800 1000 1600 3200 6400 8000 Package size: 180 * 130 * 60mm / 7.1 * 5.1 * 2.4in Package weight: 160g Instructions: 1. After receiving the goods it is recommended to fully c-harge it before using 2. Metering: continuous metering starts when it is turned on and stops metering when turned off. 3. The operation dial on the right rear side of the machine has three operation modes press forward press backward and press inward (leftward). 4. Selection of priority mode: operate the dial to go in (left) and press to modify the priority mode. 5. When the screen-arrow points to the aperture value it indicates the aperture priority mode. Press the dial forward or backward to increase or decrease the value. Long press the dial forward or backward to quickly adjust the value. 6. The-arrow on the screen points to the shutter time indicating the shutter priority mode the same dial can adjust the value. 7. Long press the dial in (left) for more than 1 second to set the sensitivity. At this time the screen-arrow points to ISO. Press again to exit the sensitivity setting. When the sensitivity is set the machine can also measure continuously. Packing List: 1 * Meter 1 * Power Cable