NY-D08 100A Spot Welder Controller Welding Machine Pneumatic Color LCD Display Multi-point Personalization with Temperat

Features Integrated temperature fan pneumatic control Integrated control no external power supply High current drive Direct drive DC12V solenoid valve fan No need for external power supply Pneumatic parameters can be changed Can be changed according to machine characteristics Temperature detection fan control with temperature protection The fan has a normally open closed intelligent control mode Support for personalization Rated voltage secondary voltage rated power With English interface Instructions Switch language The controller is powered off press and hold the red button power on the system enters the language settingWelding specification selection 1 The controller can save 10 sets of welding specification parameters2 Use the knob to make the right side currently selected as the welding specification 3 Press the red button to change the current selection to the setting parameters 4 By selecting the welding specification after the selection is made press the red button to save Terminal Description 1 foot switch terminal mechanical switch2 The power supply of the control board is connected to the AC 9V 12V power supply It must be AC 3 Temperature sensor terminal4 Status terminal controller welding status output during welding5 fan terminal connected to DC12V fan6 Solenoid valve terminal connected to DC12V pneumatic solenoid valve Package Included 1 x Spot Welder Controller1 x Temperature Sensor