NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield Storage Expansion Board USB 3.1 T300 V1.0 for NVIDIA Jetson Nano Developer Kit

Overview: This is an expansion board designed specifically for NVIDIA Jetson nano developer kit that supports up to 4TB 2.5-inch SSD/hard drives by Geekworm and Suptronics, it allowing you to expand your storage with high-speed SSD drives on NVIDIA Jetson nano developer kit. How to boot the rootfs from external drive: Click here to open More details: Click to open the wiki ITEM DESCRIPTION FOR USE WITH Jetson Nano OPERATING SYSTEM All operating systems KEY FEATURES Ideal storage solution for Jetson Nano - 2.5" SATA HDD/SSD Shield Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano Quick file transfer with high-speed USB3.1 Gen1 connectivity from a PC or a Mac Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed On-board DC power jack allows to provide enough power to HDD/SSD Intelligent power management - Automatic powering off when system shutdown With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano USB bus-powered or powered by external power adapter LED blue indicator indicates drive status POWER SUPPLY Power supply via DC jack : 5VDC 5%. A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT.. I/O PORTS USB Type-A socket x 1 DC Jack 5.5x2.1mm x 1 22Pin SATA socket x 1 DIMENSION PCB Size: 123mm x 79mm Package inlcudes: 1 x T300 V1.0 2.5 inch SATA SSD/HDD Shield 1 x USB 3.0 Bridge 1 x 1 Female to 2 Male DC cable (length: 15cm) 1 x Installaton screw pack There are 3 power supply methods: 1. Directly power the motherboard is acceptable if use a good quality DC 5V 4A power adapter. (otherwise, the current is not enough to 2.5 inch SATA SSD) 2. Power the jetson nano and T300 with 1 female to 2 male DC cable, require a good quality DC 5V 4A power supply, otherwise, jetson nano will be automatically shut down. 3. Can power the T300 separately, but will lose the power management function.