NS191 Switch bluetooth Handle Mini Gamepad Dual Turbo Burst Gaming Joystick with Screen Shot Vibration

For the first connection and pairing please follow the steps below 1 Turn on the Switch host2 Install the handle on the Switch host and use the slide on the side of the host to slide the handle from top to bottom until you hear a slight click3 The handle starts to automatically register and pair After the pairing is successful it can be plugged in and used on the host or removedConnect and use via Bluetooth After the controller is installed on the host the pairing cannot be registered please refer to the following methods to check the pairing problem 1 Make sure your host has been upgraded to the latest system2 Press the pairing button to close the handle reset the connection of the handle and then plug the handle into the host3 Insert the handle into the host make sure the direction of insertion is correct it slides to the end and a slight click sound is heard4 Unplug the handle from the host try to insert it again and rule out that it cannot be paired because there is no good contact5 If the handle cannot be awakened please charge your handle before trying to pairNote 1 The switch host must be in the on state if the host is in the dormant or off state the handle cannot be paired2 When the handle cannot be awakened or the LED indicator continues to flash slowly please charge your handle before using itHow to pair connect back the controller to the switch host again After the handle is paired for the first time the handle can be connected to the ho