Multifunctional Full Band Detector Dsk900 Mini Detector RF Detector Frequency Tester

Description: 1. Detection Pinhole Camera (1) Press The Switch Button To Turn On The Detector, The Back Of The 6 Lasers Starts To Flash, And Keep Pressing And Pressing For 2 Seconds To Change The Laser Flicker Frequency Once. (2) Release The Switch To Select The Desired Flicker Frequency, A Total Of 8 Levels, Observe The Surrounding Environment Through The Window, And If The Pinhole Camera Lens Is Detected, It Will Reflect And Gather A Red Dot. 2 .Detection Of Cell Phone Signals (1) At The Point Where The Test Is Required, Or Where An Object, Such As A Car, Can Be Found, There Is No Signal Around Or Where The Wireless Signal Is Weak. (2) Turn The Sensitivity Adjustment Switch To The Maximum, And The Strong Vibration Of The Machine At This Time. Slowly Turn The Small Sensitivity Switch In The Opposite Direction Until The Vibration Stops. (3) The Sensitivity Of The Machine At This Time Is The Best Initial Test State In The Field. (4) If The Wireless Signal Is Detected, The Machine Award Will Vibrate Or Beep. When The Signal Becomes Strong, The Indicator Bar Is Fully Illuminated, And The Antenna Is Gradually Shortened, And The Small Sensitivity Switch Is Slowly Reversed To Reduce The Frame Measurement Range. Finally Find The Source Of The Transmission. 3. Detection Of Strong Magnetic Signal Source (1) Magnetic Locator, Detector Is Mostly Used In Cars, And Concealed Test Placement (2) The Detection Distance Of The Strong Magnetic Probe Is Within 5-10% (3) It Is Recommended That In The Car, The Bottom Of The Car, Or After Opening The Front And Rear Covers Of The Car, The Award-winning Magnetic Probe Is Close To The Area To Be Detected, And The Grid Is Drilled For Close-range Exploration, So That The Strong Magnetic Adsorption Device Can Be Easily Found. Specifications: Specifications: European Regulations Colour: Black Material: Abs Frequency Range: 1MHZ-6.5GHZ Power Supply Built-in: 3.7v 400mA Lithium Battery Charging Voltage: 5-6VDC Working Current: 100mA Use Time: About 5h Body Weight: 61g Package Includes: 1 x Detector Details Pictures: